Install instructions:
# Get artifacts
wget http://releases.linaro.org/11.10/android/images/staging-snowball/boot.tar.bz2 http://releases.linaro.org/11.10/android/images/staging-snowball/system.tar.bz2 http://releases.linaro.org/11.10/android/images/staging-snowball/userdata.tar.bz2
# Get the latest linaro image tools
bzr branch lp:linaro-image-tools
# Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'
dmesg
# Create media
sudo ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdX --dev snowball_sd --system system.tar.bz2 --boot boot.tar.bz2 --userdata userdata.tar.bz2
# Notes
You must setup the boot args:
U8500 $ setenv loadbootscript fat load mmc 1:1 ${loadaddr} /boot.scr
U8500 $ saveenv
Saving Environment to EMMC...
Writing to EMMC... done
U8500 $ run bootcmd
The next time the board will boot automatically.
For more information on how to use this builds please see the Linaro wiki at:
https://wiki.linaro.org/Platform/Android/ImageInstallation
| Name | Last modified | Size | License | |
|---|---|---|---|---|
|
Parent Directory | |||
|
MD5SUMS | 22-Oct-2011 13:30 | 147 | open |
|
|
README | 15-Nov-2011 14:24 | 1.3K | open |
|
boot.tar.bz2 | 22-Oct-2011 13:15 | 4.2M | open |
|
pinned-manifest.xml | 22-Oct-2011 12:43 | 24.1K | open |
|
|
source-manifest.xml | 22-Oct-2011 11:53 | 24.1K | open |
|
|
system.tar.bz2 | 22-Oct-2011 13:30 | 81.5M | open |
|
|
userdata.tar.bz2 | 22-Oct-2011 13:00 | 363.9K | open |