Install instructions:

# Get artifacts

# Get the latest linaro image tools
bzr branch lp:linaro-image-tools

# Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'

# Create media
sudo ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdX --dev snowball_sd --system system.tar.bz2 --boot boot.tar.bz2 --userdata userdata.tar.bz2

# Notes
You must setup the boot args:

U8500 $ setenv loadbootscript fat load mmc 1:1 ${loadaddr} /boot.scr
U8500 $ saveenv
Saving Environment to EMMC...
Writing to EMMC... done
U8500 $ run bootcmd

The next time the board will boot automatically.

For more information on how to use this builds please see the Linaro wiki at:

NameLast modifiedSizeLicense

Parent Directory Parent Directory
other MD5SUMS 19-Nov-2011 05:29 147 stericsson
other README 24-Nov-2011 18:51 1.3K stericsson
application/x-tar boot.tar.bz2 19-Nov-2011 05:16 4.1M stericsson
other leb-snowball.img.gz 22-Nov-2011 17:12 62.1M stericsson
application/xml pinned-manifest.xml 19-Nov-2011 04:40 24.2K stericsson
application/xml source-manifest.xml 19-Nov-2011 04:40 24.2K stericsson
application/x-tar system.tar.bz2 19-Nov-2011 05:29 54.3M stericsson
application/x-tar userdata.tar.bz2 19-Nov-2011 04:58 364.6K stericsson