Install instructions

There are two methods to install linaro builds:

Using pre-built image

 # Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'
  $ dmesg

  $ SDCARD=/dev/sdX # sdcard found from dmesg above
  $ URL=
  $ curl $URL | gunzip -c | sudo dd bs=64k of=$SDCARD

  # You must then install the binaries as described below with "Get binaries"
Note: Windows users may use the Image Writer for Windows

Building a Custom Image

 # Get artifacts
  $ wget

  # Get linaro image tools
  # method 1: using binary package for Ubuntu (PPA)
  $ sudo add-apt-repository ppa:linaro-maintainers/tools
  $ sudo apt-get update
  $ sudo apt-get install linaro-image-tools
  # method 2: using source code
  $ wget

  # Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'
  $ dmesg

  # Create media
  $ sudo linaro-android-media-create --mmc /dev/sdX --dev panda --system system.tar.bz2 --boot boot.tar.bz2 --userdata userdata.tar.bz2
# Get binaries $ wget $ chmod a+x $ ./ /dev/sdX2 "device node of system partition"


For more information on how to use this builds please see the Linaro wiki at:

NameLast modifiedSizeLicense

Parent Directory Parent Directory
other MANIFEST 17-Feb-2012 09:33 271 open
other MD5SUMS 17-Feb-2012 09:29 147 open
other README 23-Feb-2012 16:30 2.0K open
application/x-tar boot.tar.bz2 17-Feb-2012 09:29 4.9M open
text 23-Feb-2012 15:46 1.8K open
other kernel_config 17-Feb-2012 09:29 74.4K open
other lava-job-info 17-Feb-2012 09:33 73 open
other panda-ics-gcc46-tilt-tracking-blob.img.gz 22-Feb-2012 00:02 138.0M open
application/xml pinned-manifest.xml 17-Feb-2012 09:29 30.3K open
application/xml source-manifest.xml 17-Feb-2012 09:29 30.3K open
application/x-tar system.tar.bz2 17-Feb-2012 09:33 126.9M open
application/x-tar userdata.tar.bz2 17-Feb-2012 09:33 114.6K open