Install instructions

There are two methods to install linaro builds:

Using pre-built image

 # Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'
  $ dmesg

  $ SDCARD=/dev/sdX # sdcard found from dmesg above
  $ wget
  $ gunzip panda-ics-gcc47-omapzoom-stable-blob.img.gz
  $ sudo dd bs=4M if=panda-ics-gcc47-omapzoom-stable-blob.img of=$SDCARD

  # You must then install the binaries as described below with "Get binaries"
Note: Windows users may use the Image Writer for Windows

Building a Custom Image

 # Get artifacts
  $ wget

  # Get linaro image tools
  # method 1: using binary package for Ubuntu (PPA)
  $ sudo add-apt-repository ppa:linaro-maintainers/tools
  $ sudo apt-get update
  $ sudo apt-get install linaro-image-tools
  # method 2: using source code
  $ wget

  # Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'
  $ dmesg

  # Create media
  $ sudo linaro-android-media-create --mmc /dev/sdX --dev panda --system system.tar.bz2 --boot boot.tar.bz2 --userdata userdata.tar.bz2

  # Get binaries
  $ wget
  $ chmod a+x
  $ ./ /dev/sdX2 "device node of system partition"


For more information on how to use this builds please see the Linaro wiki at:

NameLast modifiedSizeLicense

Parent Directory Parent Directory
other MANIFEST 24-Jul-2012 14:48 338 open
other README 24-Jul-2012 15:15 2.2K open
application/x-tar boot.tar.bz2 24-Jul-2012 14:48 3.9M open
text 25-Jul-2012 23:03 2.2K open
other lava-job-info 24-Jul-2012 14:48 73 open
text 24-Jul-2012 14:48 2.4K open
text 24-Jul-2012 14:48 1.7K open
other panda-ics-gcc47-omapzoom-stable-blob.img.gz 25-Jul-2012 19:23 145.9M open
application/xml pinned-manifest.xml 24-Jul-2012 14:48 32.6K open
application/xml source-manifest.xml 24-Jul-2012 14:48 22.9K open
application/x-tar system.tar.bz2 24-Jul-2012 14:48 136.2M open
application/x-tar userdata.tar.bz2 24-Jul-2012 14:48 216.4K open