NameLast modifiedSizeLicense

Parent Directory Parent Directory
other MANIFEST 17-Dec-2012 10:18 624 open
other MD5SUMS 17-Dec-2012 10:04 147 open
application/x-tar boot.tar.bz2 17-Dec-2012 10:04 5.1M open
other kernel_config 17-Dec-2012 10:04 74.6K open
other lava-job-info 17-Dec-2012 10:18 74 open
text linaro_android_build_cmds.sh 17-Dec-2012 10:04 3.4K open
text linaro_kernel_build_cmds.sh 17-Dec-2012 10:04 1.7K open
other pandaboard.img.bz2 17-Dec-2012 10:12 226.5M open
application/xml pinned-manifest.xml 17-Dec-2012 10:04 44.1K open
application/xml source-manifest.xml 17-Dec-2012 10:04 56.0K open
application/x-tar system.tar.bz2 17-Dec-2012 10:17 176.6M open
other u-boot.img 17-Dec-2012 10:17 193.4K open
application/x-tar userdata.tar.bz2 17-Dec-2012 10:18 43.8M open


Instructions for https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-stable-blob/

Get artifacts

Scroll down to the 'Downloads’ section

Click on each link to download:

  • boot.tar.bz2
  • system.tar.bz2
  • userdata.tar.bz2

Get linaro image tools

Run these commands to get all the dependencies for linaro-image-tools and the tip of linaro-image-tools

  $ sudo add-apt-repository ppa:linaro-maintainers/tools
  $ sudo apt-get update
  $ sudo apt-get install linaro-image-tools
If you’re using a released build (with a -release or from releases.linaro.org), skip this step. If you’re using a “tip” build do not skip the step and do the following: $ sudo apt-get install bzr $ bzr branch lp:linaro-image-tools

Create media (SD card)

Disable automount (instructions provided for Gnome)

  $ TMP1=$(dconf read /org/gnome/desktop/media-handling/automount)
  $ TMP2=$(dconf read /org/gnome/desktop/media-handling/automount-open)
  $ dconf write /org/gnome/desktop/media-handling/automount false
  $ dconf write /org/gnome/desktop/media-handling/automount-open false

Insert an SD card

Run 'dmesg’

$ dmesg

Look for a line that looks like the following at the end of the log

[288582.790722]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >

WARNING In the next step, make sure you use /dev/“whatever you see above”.
You can erase your hard drive with the wrong parameter.

Run linaro image tools

$ linaro-android-media-create --mmc /dev/sdc --dev panda --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2

If you’re using tip of linaro image tools

$ ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev panda --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2

Install graphics libraries

  $ wget http://people.linaro.org/~vishalbhoj/install-binaries-4.0.4.sh
  $ chmod a+x install-binaries-4.0.4.sh
  $ ./install-binaries-4.0.4.sh

Restore automount

  $ dconf write /org/gnome/desktop/media-handling/automount $TMP1
  $ dconf write /org/gnome/desktop/media-handling/automount-open $TMP2

Remove the SD card from the device writer and plug it into the board.

Check console output

Plug in an USB-to-serial converter and run minicom

$ minicom -D /dev/ttyUSB0 -w -C minicom.txt

Instructions for https://android-build.linaro.org/builds/~linaro-android///

Get artifacts

Scroll down to the 'Downloads’ section

Save linaro_android_build_cmds.sh to where you’d like to make your build.

Run the build script

The linaro_android_build_cmds.sh script will download the source and create the build.

  $ chmod +x linaro_android_build_cmds.sh
  $ ./linaro_android_build_cmds.sh

Get linaro image tools

Run these commands to get all the dependencies for linaro-image-tools and the tip of linaro-image-tools

  $ sudo add-apt-repository ppa:linaro-maintainers/tools
  $ sudo apt-get update
  $ sudo apt-get install linaro-image-tools
If you’re using a released build (with a -release or from releases.linaro.org), skip this step. If you’re using a “tip” build do not skip the step and do the following: $ sudo apt-get install bzr $ bzr branch lp:linaro-image-tools

Create media (SD card)

Disable automount (instructions provided for Gnome)

  $ TMP1=$(dconf read /org/gnome/desktop/media-handling/automount)
  $ TMP2=$(dconf read /org/gnome/desktop/media-handling/automount-open)
  $ dconf write /org/gnome/desktop/media-handling/automount false
  $ dconf write /org/gnome/desktop/media-handling/automount-open false

Insert an SD card

Run 'dmesg’

$ dmesg

Look for a line that looks like the following at the end of the log

[288582.790722]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >

WARNING In the next step, make sure you use /dev/“whatever you see above”.
You can erase your hard drive with the wrong parameter.

Run linaro image tools

$ linaro-android-media-create --mmc /dev/sdc --dev <BOARD> --boot out/target/product/<BOARD>/boot.tar.bz2 --system out/target/product/<BOARD>/system.tar.bz2 --userdata out/target/product/<BOARD>/userdata.tar.bz2

If you’re using tip of linaro image tools

$ ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev <BOARD> --boot out/target/product/<BOARD>/boot.tar.bz2 --system out/target/product/<BOARD>/system.tar.bz2 --userdata
out/target/product/<BOARD>/userdata.tar.bz2

Restore automount

  $ dconf write /org/gnome/desktop/media-handling/automount $TMP1
  $ dconf write /org/gnome/desktop/media-handling/automount-open $TMP2

Remove the SD card from the device writer and plug it into the board.

Check console output

Plug in an USB-to-serial converter and run minicom

$ minicom -D /dev/ttyUSB0 -w -C minicom.txt