Linaro Releases

Name	Last modified	Size	License

Parent Directory
MANIFEST	12-Jan-2018 05:25	309	open
MD5SUMS	12-Jan-2018 05:25	147	open
boot.tar.bz2	12-Jan-2018 05:25	3.9M	samsung
kernel_config	12-Jan-2018 05:25	70.4K	open
lava-job-info	12-Jan-2018 05:25	74	open
linaro_android_build_cmds.sh	12-Jan-2018 05:25	4.9K	open
linaro_kernel_build_cmds.sh	12-Jan-2018 05:25	1.5K	open
origen.img.bz2	26-Feb-2018 15:34	179.1M	samsung
pinned-manifest.xml	12-Jan-2018 05:25	49.7K	open
source-manifest.xml	12-Jan-2018 05:25	61.7K	open
system.tar.bz2	26-Feb-2018 15:34	174.1M	samsung
userdata.tar.bz2	12-Jan-2018 05:26	665.1K	samsung

Binary Image Installation
Building From Source

Instructions for https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-samsunglt-tracking-blob/

Get artifacts

Scroll down to the ‘Downloads’ section

Click on each link to download:

boot.tar.bz2
system.tar.bz2
userdata.tar.bz2

Get linaro image tools

Run these commands to get all the dependencies for linaro-image-tools and the tip of linaro-image-tools

  $ sudo add-apt-repository ppa:linaro-maintainers/tools
  $ sudo apt-get update
  $ sudo apt-get install linaro-image-tools

If you’re using a released build (with a -release or from releases.linaro.org), skip this step.
If you’re using a “tip” build do not skip the step and do the following:

  $ sudo apt-get install bzr
  $ bzr branch lp:linaro-image-tools

Create media (SD card)

Disable automount (instructions provided for Gnome)

  $ TMP1=$(dconf read /org/gnome/desktop/media-handling/automount)
  $ TMP2=$(dconf read /org/gnome/desktop/media-handling/automount-open)
  $ dconf write /org/gnome/desktop/media-handling/automount false
  $ dconf write /org/gnome/desktop/media-handling/automount-open false

Insert an SD card

Run ‘dmesg’

$ dmesg

Look for a line that looks like the following at the end of the log

[288582.790722]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >

WARNING In the next step, make sure you use /dev/“whatever you see above”.
You can erase your hard drive with the wrong parameter.

Run linaro image tools

$ linaro-android-media-create --mmc /dev/sdc --dev origen --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2

If you’re using tip of linaro image tools

$ ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev origen --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2

Restore automount

  $ dconf write /org/gnome/desktop/media-handling/automount $TMP1
  $ dconf write /org/gnome/desktop/media-handling/automount-open $TMP2

Remove the SD card from the device writer and plug it into the board.

Check console output

Plug in an USB-to-serial converter and run minicom

$ minicom -D /dev/ttyUSB0 -w -C minicom.txt

Instructions for https://android-build.linaro.org/builds/~linaro-android//