NameLast modifiedSizeLicense

Parent Directory Parent Directory
other MANIFEST 12-Jan-2018 08:15 240 open
other MD5SUMS 12-Jan-2018 08:15 0 open
other boot.img 12-Jan-2018 08:15 4.4M open
other lava-job-info 12-Jan-2018 08:15 74 open
application/x-sh linaro_android_build_cmds.sh 12-Jan-2018 08:15 7.1K open
text pinned-manifest.xml 12-Jan-2018 08:15 51.9K open
other ramdisk-recovery.img 12-Jan-2018 08:15 1007.2K open
other ramdisk.img 12-Jan-2018 08:15 445.4K open
other recovery.img 12-Jan-2018 08:15 4.9M open
text source-manifest.xml 12-Jan-2018 08:15 64.7K open
other system.img 26-Feb-2018 16:37 363.9M open
other userdata.img 26-Feb-2018 16:38 139.4M open


Linaro releases monthly binary Android images for the Galaxy Nexus platform.

About the Android Nexus Release

This release includes Linaro Android Jelly Bean (4.2.2), and boots on the Galaxy Nexus. Sources are also made available so you can build your own images. The 13.07 release is built with 4.8 toolchain. There are occasional reboots reported while using the image. The release also includes optimized memory routines from the Toolchain Working Group. Please report bugs if any regressions are observed.

Where To Find More Information

More information on Linaro can be found on our website.

Feedback and Support

Subscribe to the important Linaro mailing lists and join our IRC channels to stay on top of Linaro development.

  • Linaro Android Development mailing list
  • Linaro Android IRC channel on irc.freenode.net at #linaro-android

  • Bug reports should be filed in Launchpad against the individual packages that are affected. If a suitable package cannot be identified, feel free to assign them to Linaro Android project.
  • Questions? ask Linaro.
  • Interested in commercial support? inquire at Linaro support

Fixed in this release

  • None
    h2. Known issues
  • LP: #1186187 crash when taking photo from camera with optimized memcpy for Nexus build

Instructions for https://android-build.linaro.org/builds/~linaro-android//

Get artifacts

Scroll down to the ‘Downloads’ section

Click on each link to download:

  • boot.tar.bz2
  • system.tar.bz2
  • userdata.tar.bz2

Get linaro image tools

Run these commands to get all the dependencies for linaro-image-tools and the tip of linaro-image-tools

  $ sudo add-apt-repository ppa:linaro-maintainers/tools
  $ sudo apt-get update
  $ sudo apt-get install linaro-image-tools

If you’re using a released build (with a -release or from releases.linaro.org), skip this step.
If you’re using a “tip” build do not skip the step and do the following:

  $ sudo apt-get install bzr
  $ bzr branch lp:linaro-image-tools

Create media (SD card)

Disable automount (instructions provided for Gnome)

  $ TMP1=$(dconf read /org/gnome/desktop/media-handling/automount)
  $ TMP2=$(dconf read /org/gnome/desktop/media-handling/automount-open)
  $ dconf write /org/gnome/desktop/media-handling/automount false
  $ dconf write /org/gnome/desktop/media-handling/automount-open false

Insert an SD card

Run ‘dmesg’

$ dmesg

Look for a line that looks like the following at the end of the log

[288582.790722]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >

WARNING In the next step, make sure you use /dev/“whatever you see above”.
You can erase your hard drive with the wrong parameter.

Run linaro image tools

$ linaro-android-media-create --mmc /dev/sdc --dev <BOARD> --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2

If you’re using tip of linaro image tools

$ ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev <BOARD> --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2

To find run linaro-android-media-create with a -h and read the help.

Restore automount

  $ dconf write /org/gnome/desktop/media-handling/automount $TMP1
  $ dconf write /org/gnome/desktop/media-handling/automount-open $TMP2

Remove the SD card from the device writer and plug it into the board.

Check console output

Plug in an USB-to-serial converter and run minicom

$ minicom -D /dev/ttyUSB0 -w -C minicom.txt

Instructions for https://android-build.linaro.org/builds/~linaro-android//

Get artifacts

Scroll down to the ‘Downloads’ section

Save linaro_android_build_cmds.sh to where you’d like to make your build.

Run the build script

The linaro_android_build_cmds.sh script will download the source and create the build.

  $ chmod +x linaro_android_build_cmds.sh
  $ ./linaro_android_build_cmds.sh -h #To print the script usage

Most commonly used build options:

  $ ./linaro_android_build_cmds.sh -t #To build from the tip of the branch without overlay
  $ ./linaro_android_build_cmds.sh -t -o <overlay> #To build from the tip of the branch with provided overlay
  $ ./linaro_android_build_cmds.sh -m <pinned_manifest> -o <overlay> #To reproduce an exact build from pinned manifest
  $ ./linaro_android_build_cmds.sh -t -l <login-id> #Provide login/access ID to clone and build code from linaro-private repositories

Get linaro image tools

Run these commands to get all the dependencies for linaro-image-tools and the tip of linaro-image-tools

  $ sudo add-apt-repository ppa:linaro-maintainers/tools
  $ sudo apt-get update
  $ sudo apt-get install linaro-image-tools
If you’re using a released build (with a -release or from releases.linaro.org), skip this step. If you’re using a “tip” build do not skip the step and do the following: $ sudo apt-get install bzr $ bzr branch lp:linaro-image-tools

Create media (SD card)

Disable automount (instructions provided for Gnome)

  $ TMP1=$(dconf read /org/gnome/desktop/media-handling/automount)
  $ TMP2=$(dconf read /org/gnome/desktop/media-handling/automount-open)
  $ dconf write /org/gnome/desktop/media-handling/automount false
  $ dconf write /org/gnome/desktop/media-handling/automount-open false

Insert an SD card

Run ‘dmesg’

$ dmesg

Look for a line that looks like the following at the end of the log

[288582.790722]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >

WARNING In the next step, make sure you use /dev/“whatever you see above”.
You can erase your hard drive with the wrong parameter.

Run linaro image tools

$ linaro-android-media-create --mmc /dev/sdc --dev <BOARD> --boot out/target/product/<BOARD>/boot.tar.bz2 --system out/target/product/<BOARD>/system.tar.bz2 --userdata out/target/product/<BOARD>/userdata.tar.bz2

If you’re using tip of linaro image tools

$ ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev <BOARD> --boot out/target/product/<BOARD>/boot.tar.bz2 --system out/target/product/<BOARD>/system.tar.bz2 --userdata
out/target/product/<BOARD>/userdata.tar.bz2

Restore automount

  $ dconf write /org/gnome/desktop/media-handling/automount $TMP1
  $ dconf write /org/gnome/desktop/media-handling/automount-open $TMP2

Remove the SD card from the device writer and plug it into the board.

Check console output

Plug in an USB-to-serial converter and run minicom

$ minicom -D /dev/ttyUSB0 -w -C minicom.txt