Install instructions:

# Get artifacts

# Get the latest linaro image tools
bzr branch lp:linaro-image-tools

# Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'

# Create media
sudo ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdX --dev snowball_sd --system system.tar.bz2 --boot boot.tar.bz2 --userdata userdata.tar.bz2


You must setup the boot args:

U8500 $ setenv loadbootscript fat load mmc 1:1 ${loadaddr} /boot.scr
U8500 $ saveenv
Saving Environment to EMMC...
Writing to EMMC... done
U8500 $ run bootcmd

The next time the board will boot automatically. For more information on how to use this builds please see the Linaro wiki at:

NameLast modifiedSizeLicense

Parent Directory Parent Directory
other MD5SUMS 11-Jan-2018 23:11 147 stericsson
other README 11-Jan-2018 23:11 1.2K stericsson
application/x-tar boot.tar.bz2 11-Jan-2018 23:11 4.1M stericsson
text pinned-manifest.xml 11-Jan-2018 23:11 24.2K stericsson
text source-manifest.xml 11-Jan-2018 23:11 24.2K stericsson
application/x-tar system.tar.bz2 26-Feb-2018 13:25 54.1M stericsson
application/x-tar userdata.tar.bz2 11-Jan-2018 23:12 364.7K stericsson