Build: https://android-build.linaro.org/builds/~linaro-android/staging-snowball-11.11-release/#build=2

Install instructions:

# Get artifacts
wget http://releases.linaro.org/11.11/android/images/staging-snowball/boot.tar.bz2 http://releases.linaro.org/11.11/android/images/staging-snowball/system.tar.bz2 http://releases.linaro.org/11.11/android/images/staging-snowball/userdata.tar.bz2

# Get the latest linaro image tools
bzr branch lp:linaro-image-tools

# Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'
dmesg

# Create media
sudo ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdX --dev snowball_sd --system system.tar.bz2 --boot boot.tar.bz2 --userdata userdata.tar.bz2

# Notes
You must setup the boot args:

U8500 $ setenv loadbootscript fat load mmc 1:1 ${loadaddr} /boot.scr
U8500 $ saveenv
Saving Environment to EMMC...
Writing to EMMC... done
U8500 $ run bootcmd

The next time the board will boot automatically.

For more information on how to use this builds please see the Linaro wiki at:

        https://wiki.linaro.org/Platform/Android/ImageInstallation

NameLast modifiedSizeLicense

Parent Directory Parent Directory
other MD5SUMS 11-Jan-2018 23:13 147 stericsson
other README 11-Jan-2018 23:13 1.3K stericsson
application/x-tar boot.tar.bz2 11-Jan-2018 23:13 4.1M stericsson
text pinned-manifest.xml 11-Jan-2018 23:13 24.2K stericsson
text source-manifest.xml 11-Jan-2018 23:13 24.2K stericsson
application/x-tar system.tar.bz2 26-Feb-2018 13:25 54.3M stericsson
application/x-tar userdata.tar.bz2 11-Jan-2018 23:13 364.6K stericsson