Linaro Releases

Build: https://android-build.linaro.org/builds/~linaro-android/landing-snowball-11.12-release/#build=3

Install instructions

There are two methods to install linaro builds:

using pre-built image
creating your own image with linaro image tools

Using pre-built image

 # Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'
  $ dmesg

  $ SDCARD=/dev/sdX # sdcard found from dmesg above
  $ URL=http://releases.linaro.org/11.12/android/images/landing-snowball/landing-snowball.img.gz
  $ curl $URL | gunzip -c | sudo dd bs=64k of=$SDCARD

Note: Windows users may use the Image Writer for Windows

Building a Custom Image

Download boot.tar.bz2 , system.tar.bz2 and userdata.tar.bz2 from the links below

 # Get linaro image tools
  # method 1: using binary package for Ubuntu (PPA)
  $ sudo add-apt-repository ppa:linaro-maintainers/tools
  $ sudo apt-get update
  $ sudo apt-get install linaro-image-tools
  # method 2: using source code
  $ wget http://releases.linaro.org/11.12/components/platform/linaro-image-tools/linaro-image-tools-2011.12.tar.gz

  # Insert SD card and note the assigned '/dev/sdX' or '/dev/mmcblk0'
  $ dmesg

  # Create media
  $ sudo linaro-android-media-create --mmc /dev/sdX --dev snowball_sd --system system.tar.bz2 --boot boot.tar.bz2 --userdata userdata.tar.bz2

Note: If you're building the source from scratch, you should untar the vendor tarball in your top level directory then build. vendor.tar.bz2 can be downloaded from the link below.

Notes

Due to differences in default U-Boot environment, these instructions will not work if you have flashed the Igloo Community Android Gingerbread releases, please flash the latest Ubuntu image to get a compatible U-Boot.

You must setup the boot args:

  U8500 $ setenv loadbootscript fat load mmc 1:1 ${loadaddr} /boot.scr
  U8500 $ saveenv
  Saving Environment to EMMC...
  Writing to EMMC... done
  U8500 $ run bootcmd

ADB only works over IP

  stop adbd
  setprop service.adb.tcp.port 6565
  start adbd
  ifconfig eth0 # to get boardsIP

  adb connect boardsIP:6565

Links

For more information on how to use this builds please see the Linaro wiki at:

http://wiki.linaro.org/Platform/Android/ImageInstallation

Name	Last modified	Size	License

Parent Directory
MD5SUMS	11-Jan-2018 23:25	147	stericsson
README	11-Jan-2018 23:25	2.7K	stericsson
boot.tar.bz2	11-Jan-2018 23:25	4.2M	stericsson
landing-snowball.img.gz	26-Feb-2018 13:30	100.6M	stericsson
pinned-manifest.xml	11-Jan-2018 23:25	29.6K	stericsson
source-manifest.xml	11-Jan-2018 23:25	29.6K	stericsson
system.tar.bz2	26-Feb-2018 13:31	93.2M	stericsson
userdata.tar.bz2	11-Jan-2018 23:25	33.2K	stericsson
vendor.tar.bz2	11-Jan-2018 23:25	535.5K	stericsson

EULA