Build: https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-samsunglt-stable-blob-12.08-release/#build=1
Install instructions:
== Get artifacts =
# http://releases.linaro.org/12.08/android/images/origen-jb-gcc47-samsunglt-stable-blob/boot.tar.bz2
# http://releases.linaro.org/12.08/android/images/origen-jb-gcc47-samsunglt-stable-blob/system.tar.bz2
# http://releases.linaro.org/12.08/android/images/origen-jb-gcc47-samsunglt-stable-blob/userdata.tar.bz2
= Get linaro image tools =
Run these commands to get all the dependencies for linaro-image-tools
$ sudo add-apt-repository ppa:linaro-maintainers/tools
$ sudo apt-get update
$ sudo apt-get install linaro-image-tools
= Create media (SD card) =
Disable automount (instructions provided for Gnome)
$ TMP1=$(dconf read /org/gnome/desktop/media-handling/automount)
$ TMP2=$(dconf read /org/gnome/desktop/media-handling/automount-open)
$ dconf write /org/gnome/desktop/media-handling/automount false
$ dconf write /org/gnome/desktop/media-handling/automount-open false
Insert SD card
Run 'dmesg'
$ dmesg
Look for a line that looks like the following at the end of the log
[288582.790722] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
WARNING: In the next step, make sure you use /dev/"whatever you see above".
You can erase your hard drive with the wrong parameter.
Run linaro image tools
$ linaro-android-media-create --mmc /dev/sdc --dev origen --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2
Restore automount
$ dconf write /org/gnome/desktop/media-handling/automount $TMP1
$ dconf write /org/gnome/desktop/media-handling/automount-open $TMP2
Remove the SD card from the device writer and plug it into the board.
= Check console output =
Plug in an USB-to-serial converter and run minicom
$ minicom -D /dev/ttyUSB0 -w -C minicom.txt
= Links =
For more information on how to use this builds please see the Linaro wiki at:
http://wiki.linaro.org/Platform/Android/ImageInstallation
