Linaro Releases

Name	Last modified	Size	License

Parent Directory
MANIFEST	12-Jan-2018 04:57	624	open
MD5SUMS	12-Jan-2018 04:57	147	open
boot.tar.bz2	12-Jan-2018 04:57	5.1M	open
kernel_config	12-Jan-2018 04:57	74.6K	open
lava-job-info	12-Jan-2018 04:57	74	open
linaro_android_build_cmds.sh	12-Jan-2018 04:57	3.4K	open
linaro_kernel_build_cmds.sh	12-Jan-2018 04:57	1.7K	open
pandaboard.img.bz2	26-Feb-2018 15:24	226.5M	open
pinned-manifest.xml	12-Jan-2018 04:57	44.1K	open
source-manifest.xml	12-Jan-2018 04:57	56.0K	open
system.tar.bz2	26-Feb-2018 15:24	176.6M	open
u-boot.img	12-Jan-2018 04:58	193.4K	open
userdata.tar.bz2	26-Feb-2018 15:24	43.8M	open

Binary Image Installation
Building From Source

Instructions for https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-stable-blob/

Get artifacts

Scroll down to the ‘Downloads’ section

Click on each link to download:

boot.tar.bz2
system.tar.bz2
userdata.tar.bz2

Get linaro image tools

Run these commands to get all the dependencies for linaro-image-tools and the tip of linaro-image-tools

  $ sudo add-apt-repository ppa:linaro-maintainers/tools
  $ sudo apt-get update
  $ sudo apt-get install linaro-image-tools

If you’re using a released build (with a -release or from releases.linaro.org), skip this step. If you’re using a “tip” build do not skip the step and do the following: $ sudo apt-get install bzr $ bzr branch lp:linaro-image-tools

Create media (SD card)

Disable automount (instructions provided for Gnome)

  $ TMP1=$(dconf read /org/gnome/desktop/media-handling/automount)
  $ TMP2=$(dconf read /org/gnome/desktop/media-handling/automount-open)
  $ dconf write /org/gnome/desktop/media-handling/automount false
  $ dconf write /org/gnome/desktop/media-handling/automount-open false

Insert an SD card

Run ‘dmesg’

$ dmesg

Look for a line that looks like the following at the end of the log

[288582.790722]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >

WARNING In the next step, make sure you use /dev/“whatever you see above”.
You can erase your hard drive with the wrong parameter.

Run linaro image tools

$ linaro-android-media-create --mmc /dev/sdc --dev panda --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2

If you’re using tip of linaro image tools

$ ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev panda --boot boot.tar.bz2 --system system.tar.bz2 --userdata userdata.tar.bz2

Install graphics libraries

  $ wget http://people.linaro.org/~vishal.bhoj/install-binaries-4.0.4.sh
  $ chmod a+x install-binaries-4.0.4.sh
  $ ./install-binaries-4.0.4.sh

Restore automount

  $ dconf write /org/gnome/desktop/media-handling/automount $TMP1
  $ dconf write /org/gnome/desktop/media-handling/automount-open $TMP2

Remove the SD card from the device writer and plug it into the board.

Check console output

Plug in an USB-to-serial converter and run minicom

$ minicom -D /dev/ttyUSB0 -w -C minicom.txt

Instructions for https://android-build.linaro.org/builds/~linaro-android//